Mesh grating

Material: galvanised steel
Length: 100 cm
Load class: B125
Image Mesh grating

Matching channel body

SELF LC-150, 090, 125, 200 Plastic channel
Load class:
A15, B125, C250
Image Plastic channel
Image Mesh grating

The grate is representative of the entire design line.

ANRIN Entwässerungsrinnen aus Kunststoff

Das Material ist besonders widerstandsfähig gegenüber allen chemisch-organischen Stoffen und ist “selbstreinigend”. Stoßfest, unzerbrechlich und leistungsstark – auch bei großen Temperaturschwankungen (von -40 °C bis 100 °C). 

Das Material wird aus PE-HD hergestellt. Dieses wird zur Drainage von Regenwasser und zum Abfließen von Flüssigkeiten in der Industrie eingesetzt. Die Kombinierbarkeit mit verschiedenen Abdeckrosten ermöglicht darüber hinaus den Gebrauch in Fußgängerzonen, auf öffentlichen Plätzen und im Privat- / Wohnungsbau.

SELF LC-150, 090, 125, 200 Plastic channel product specifications
Material plastic polypropylene, polyamide (black)
Length 100 cm
Width 20.0 cm
Height 9.0. 12.5. 20.0 cm
Weight 4.6 - 19.5 kg kg
Nominal width 150
Joint formation

overlapping joint with latching system

Clasp Locking bridge
Load capacity A15 (test force 15 kN) to C250 (test force 250 kN)
Grating Mesh grating

Channel dimensions for plastic channel LC-150

Image Gutter size for SELF LC-150, 090, 125, 200 Plastic channel

SELF installation instructions

With ANRIN drainage systems, accumulating rainwater should be drained safely and quickly. Moreover, the structural elements have the task of accommodating dynamic loads arising from traffic-related demands and dispersing them to the area of the foundation.

Amongst others, the following technical rules and regulations in their respective valid versions must be observed for the selection, design and installation of ANRIN drainage systems.


The following installation guidelines are schematic representations. These are provided as examples and are non-binding. The information provided here is based on our long-term experience in excavation and road construction as well as the state-of-the-art technology. Despite this, designers and planners are always obligated to check the products and the installation instructions for their appropriateness. The example details are simplified recommendations for execution.

Constructions are to be re-created on a project-specific basis.

Image 1 SELF LC-150, 090, 125, 200 Installation guide

1.

Excavate trench. Fill in and pre-compact base course. Apply concrete pad, 3 parts sand + 1 part cement + 1 part water, to base course.

Image 2 SELF LC-150, 090, 125, 200 Installation guide

2.

Connect pipe connections to the pipeline.

Image 3 SELF LC-150, 090, 125, 200 Installation guide

3.

Place channel elements and sump unit on the concrete pad. Align components so that they are level.

Image 4 SELF LC-150, 090, 125, 200 Installation guide

4.

Position end caps.

Image 5 SELF LC-150, 090, 125, 200 Installation guide

5.

Complete the series and ensure the level alignment of the components.

Image 6 SELF LC-150, 090, 125, 200 Installation guide

6.

Backfill the concrete pad.

Image 7 SELF LC-150, 090, 125, 200 Installation guide

7.

Lay the paving.

Image 8 SELF LC-150, 090, 125, 200 Installation guide

8.

The surface should be 2 to 5 mm higher than the cover grating.

Instructions and Regulations

Guidelines and regulations
The current guidelines and regulations of the state-of-the-art technology must be observed for the installation.


For example, these are:
DIN EN 1433 „Drainage channels for vehicular and pedestrian areas
DIN 19580 „Drainage channels for vehicular and pedestrian areas
RStO „Guidelines for the standardisation of the superstructure of vehicular areas
DIN EN 206-1 „Concrete. Specification, performance, production and conformity
DIN EN 1045-2 „Concrete, reinforced and prestressed concrete structures. Part 2: Concrete – Specification, properties,
production and conformity; Application rules for DIN EN 206-1

Back to overview