Aluminium grating

with brush strips

Material: aluminum
Length: 60, 75, 100 cm
Load class: A15
Image Aluminium grating

Matching channel body

SELF comfort boot scrapers (60 x 40 mm)
Load class:
A15
Image (60 x 40 mm)
SELF comfort boot scrapers (75 x 50 mm)
Load class:
A15
Image (75 x 50 mm)
SELF comfort boot scrapers (100 x 50 mm)
Load class:
A15
Image (100 x 50 mm)

SELF comfort boot scrapers

In order to keep entry areas to home clean and dry and for a presentable design, all ANRIN SELF comfort boot scrapers are integrated into the new ground surface. As a result, dirt always remains outside your door, even under heavy demands. Modern diamond or mesh grating made of galvanised steel and aluminium grating with rubber or needle-felt strips offer the right solution for every use.

SELF comfort boot scrapers (60 x 40 mm) product specifications
Material polymer concrete
Length 60 cm
Width 40 cm
Height 8 cm
Weight 11.7 kg
Grating Aluminium grating, Diamond grating, Mesh grating
SELF comfort boot scrapers (75 x 50 mm) product specifications
Material polymer concrete
Length 75 cm
Width 50 cm
Height 8 cm
Weight 19.7 kg
Grating Aluminium grating, Diamond grating, Mesh grating
SELF comfort boot scrapers (100 x 50 mm) product specifications
Material polymer concrete
Length 100 cm
Width 50 cm
Height 8 cm
Weight 22.9 kg
Grating Aluminium grating, Diamond grating, Mesh grating

SELF Comfort boot scrapers installation instructions

SELF Comfort boot scrapers in 3 practical sizes

The following installation instructions provide schematic representations. These are intended as examples and are non-binding. The information provided here is based on our extensive experience in civil engineering and road construction as well as the current state-of-the-art. Irrespective of this, planners and installers are obliged to check the suitability of the products and the installation instructions. The details provided as examples are simplified suggestions. The element design needs to be adapted to the specific building.

Important: Insert gratings during installation.

Image 1 SELF comfort boot scrapers Installation guide

1.

Excavate trench. Backfill crushed stone or in-situ concrete pad and attach connecting pipe, where applicable.

Image 2 SELF comfort boot scrapers Installation guide

2.

Position the scraper box on the crushed stone or in-situ concrete pad. Where applicable, connect the pipeline and align to the correct height.

Image 3 SELF comfort boot scrapers Installation guide

3.

Insert the cover grating and install the surrounding floor covering.

Instructions and Regulations

Guidelines and regulations
The current guidelines and regulations of the state-of-the-art technology must be observed for the installation.


For example, these are:
DIN EN 1433 „Drainage channels for vehicular and pedestrian areas
DIN 19580 „Drainage channels for vehicular and pedestrian areas
RStO „Guidelines for the standardisation of the superstructure of vehicular areas
DIN EN 206-1 „Concrete. Specification, performance, production and conformity
DIN EN 1045-2 „Concrete, reinforced and prestressed concrete structures. Part 2: Concrete – Specification, properties,
production and conformity; Application rules for DIN EN 206-1

Back to overview