Plastic grating

Material: polyamide
Length: 100 cm
Load class: A15

Matching channel body

SELF PP EVO 063, 0100, 0125 Plastic channel
Load class:
A15, B125, C250
Image Plastic channel
Image Plastic grating

The grate is representative of the entire design line.

ANRIN plastic drainage channels

ANRIN plastic channels from the PP and PP EVO series are made from polypropylene (PP), an unbreakable, solid black plastic. Their light weight and ribbed edge profile make them easy to install and ideal for applications in residential construction.

SELF PP EVO 063, 0100, 0125 Plastic channel product specifications
Material plastic polypropylene
Length 100 cm
Width 13.1 cm
Height 6.3 cm. 9.8 cm. 14.8 cm
Weight 1.6 - 8.7 kg
Nominal width 100
Joint formation

overlapping joint with snap-in fastening

Clasp TwistLock fastening
Load capacity Cl. A15, B125 and C250

Channel dimensions for plastic channel PP EVO 063

Image Gutter size for SELF PP EVO 063, 0100, 0125 Plastic channel

ANRIN TwistLock fastening

Image ANRIN TwistLock fastening

Decades of experience and thorough product development in the fields of installation, maintenance and cleaning of drainage systems have produced convincing solutions for durable closure technologies.

ANRIN grate closures are optimized for the respective load classes and combine safety and brand quality with functional design.

The TwistLock closure finds its application in grate designs for channels of nominal width 100 mm.

Advantages:

·  Put in place – one rotation – fixed
·  Assembly without special tools
·  No rattling, no loosening

·  No disruptive bars in the channel interior area
·  Maintenance-friendly
·  Resistant to corrosion

Accessories

Image End wall pair

End wall pair

SELF PP EVO 063, 0100, 0125

Accessories dimensions for SELF PP EVO 063 closed end cap

Image Accessories dimensions for SELF PP EVO 063 closed end cap

SELF installation instructions

With ANRIN drainage systems, accumulating rainwater should be drained safely and quickly. Moreover, the structural elements have the task of accommodating dynamic loads arising from traffic-related demands and dispersing them to the area of the foundation.

Amongst others, the following technical rules and regulations in their respective valid versions must be observed for the selection, design and installation of ANRIN drainage systems.


The following installation guidelines are schematic representations. These are provided as examples and are non-binding. The information provided here is based on our long-term experience in excavation and road construction as well as the state-of-the-art technology. Despite this, designers and planners are always obligated to check the products and the installation instructions for their appropriateness. The example details are simplified recommendations for execution.

Constructions are to be re-created on a project-specific basis.

Image 1 SELF PP EVO 063, 0100, 0125 Installation guide

1.

Excavate trench. Fill in and pre-compact base course. Apply concrete pad, 3 parts sand + 1 part cement + 1 part water, to base course.

Image 2 SELF PP EVO 063, 0100, 0125 Installation guide

2.

Connect pipe connections to the pipeline.

Image 3 SELF PP EVO 063, 0100, 0125 Installation guide

3.

Place channel elements and sump unit on the concrete pad. Align components so that they are level.

Image 4 SELF PP EVO 063, 0100, 0125 Installation guide

4.

Position end caps.

Image 5 SELF PP EVO 063, 0100, 0125 Installation guide

5.

Complete the series and ensure the level alignment of the components.

Image 6 SELF PP EVO 063, 0100, 0125 Installation guide

6.

Backfill the concrete pad.

Image 7 SELF PP EVO 063, 0100, 0125 Installation guide

7.

Lay the paving.

Image 8 SELF PP EVO 063, 0100, 0125 Installation guide

8.

The surface should be 2 to 5 mm higher than the cover grating.

Instructions and Regulations

Guidelines and regulations
The current guidelines and regulations of the state-of-the-art technology must be observed for the installation.


For example, these are:
DIN EN 1433 „Drainage channels for vehicular and pedestrian areas
DIN 19580 „Drainage channels for vehicular and pedestrian areas
RStO „Guidelines for the standardisation of the superstructure of vehicular areas
DIN EN 206-1 „Concrete. Specification, performance, production and conformity
DIN EN 1045-2 „Concrete, reinforced and prestressed concrete structures. Part 2: Concrete – Specification, properties,
production and conformity; Application rules for DIN EN 206-1

Back to overview